Best table saw under 200 300 400 500 600 1000 dollars Contractor portable jobsite benchtop reviews

Best table saw under $200, 300, 400, 500, 600 & 1000 dollars | Contractor, portable, jobsite & benchtop reviews 2018

Are you buying a table saw within a set budget? It is all fine to talk about the best table saw but if it is more expensive than what you want to spend, then it does not really help you. I know how long it can take to go through all of the relevant information and choose a tool that meets your needs & budget. That is why I have put everything together and shared it here, so you can make a good buying choice within your budget. I hope that you like my review of the best table saws within each price range.

If you need a refresher on table saw basics (types, parts, safety, accessories), see my other table saw review and buying guide here. If you think you’ve got that covered, read on to see my Best Of picks for each specific price range.

A casual woodworker and a seasoned professional are going to have different needs and a different budget for their table saw purchase. Whichever you are, this review breaks down the best table saws under $200, under $300, under $400, under $500, under $600, and under $1000. But even with a budget in mind, how do you make a choice from the options available?

Look no further: I’ve gathered all the facts, figures, and information here to help you choose the best table saw for your needs, within your budget. Nobody likes making a big purchase only to regret it later, and by using the following information you can better avoid that hassle and headache.

Even with all the great products reviewed below, only one can be the named the best table saw for a given price range. When considering features, bang for your buck, and project needs, one product came out on top for each budget. The winners for each are as follows:

Read on to learn about these six and the other strong contenders.

Before we get into it it is worth noting that if you are new to woodwork and DIY and don’t want to spend a lot you can do many cuts that you can do on a table saw with a circular saw. A circular saw can be a cheaper option.

Related: See my review some budget circular saw options here.

OK, now let’s get started.

Best overall table saw, in any price range

Hot Tip
This is THE ULTIMATE GUIDE on Contractor, portable, jobsite & benchtop table saws. It is a long in-depth article. If you are looking for something specific please use the table of contents above. Most items are available on Amazon, you may want to add them to your cart on Amazon and decide your final choice another day. I also suggest that, since this is such a long epic article, that you bookmark this article in your web browser so that you can finish reading it another day.

As you read through this review, you will come to see that as you go up in price, you will generally go up in quality and power. I recognize, however, that the world operates with budgets, and so does everyone looking to purchase a table saw they can afford. That’s why I broke down this review into specific price ranges. Even so, I want to draw a conclusion about the best table saw on the market, basing my decision on the combination of affordability, quality, and usability.

When comparing the top contenders for Best Of winner for each budget, one model came out on top. It is neither the cheapest nor most expensive, but it absolutely offers the best value for what you pay: the DEWALT DWE7491RS, a jobsite table saw.

DEWALT is one of the top manufacturers for table saws, and this became evident the more research we did for this review. The manufacturer’s name kept popping up, and although we didn’t mention all of their models, they are a reliable brand that delivers what they promise.

As we’ll explain later in the review, jobsite table saws often offer the portability of smaller table saws with the features typically reserved for larger cabinet or hybrid models. This DEWALT table saw does exactly that.

The DWE7491RS provides both stability and portability at a price tag that won’t give you sticker shock. More information on our top pick can be found below, along with other top contenders within each price range.

 

 

Best table saw under $200

Most (if not all) new table saws under $200 are going to be portable table saws, so you likely won’t be getting a saw that can tackle big home projects or professional undertakings. You could look around for used or refurbished contractor, cabinet, or hybrid table saws for under $200, but that is an unlikely find.

That being said, you can still get bang for your buck with these smaller models. My top pick for this category is the Craftsman Evolv Model 28461 table saw.the best table saw under $200 dollars - Craftsman Evolv Model 28461
This table saw is on the more expensive end of budget table saws, but you get your money’s worth in the quality and included accessories. The Craftsman Evolv 28461 comes with a stand, push stick, rip fence, miter gauge, and wrenches. It also has the three key safety features to look for in table saws: anti-kickback pawls, a riving knife, and a blade guard.

Although the Craftsman Evolv 28461 is lightweight, it is made from steel, giving it stability and durability. Keep in mind that despite the inclusion of a stand, however, the Craftsman Evolv 28461 is still a portable table saw.

It can be used for jobsite work, because of its 15-amp motor and ability to cut cleanly through hard woods, but is more ideal for home improvement projects, as are most portable table saws.  It has a 24-inch rip capacity, which is in the typical range for a portable table saw.

Unlike the portable table saws without a stand, the Craftsman Evolv 28461 can handle larger and longer pieces of stock with no issue. The rip fence and miter gauge are easy to adjust and offer precise cuts and repeatability.

For under $200, the Craftsman Evolv 28461 gives you high levels of safety, portability, and accuracy not often seen in table saws in this price range. Buy the Craftsman Evolv Model 28461 here.

(Note: Unfortunately for those looking for more power and stability, no good cabinet or hybrid table saws are in this price range (under $200). If you’ve determined you need something more than what a portable table saw lists, you’ll have to search for a used or refurbished cabinet table saw being sold at a reduced rate from market price or adjust your budget expectations. If you can spend a bit more to get a cabinet or hybrid table saw check out my review of the best table saws for the money.)

Best table saw under $300

Looking for a small footprint, big power, and a reasonable price? You’re looking for the DEWALT DW745 benchtop table saw—perfect for those who enjoy woodworking as a hobby or for small home DIY projects. At 53 pounds, this benchtop table saw is easy to transport from one location to the next, even without a stand or wheels. the best table saw under $300 - DEWALT DW745 benchtop
As a benchtop model, it comes as no surprise that the DW745 has no stand, but it is adaptable to certain aftermarket stands. However, the model does come with a miter gauge, push stick, and blade guard to increase the safety of using the saw.

Similar to other benchtop and jobsite table saws, the DW745 has a 15-amp motor and boasts a rip capacity of 20 inches—smaller than that of the Craftsman Evolv (our under $200 category winner), but fairly large for its light weight.

The fence moves smoothly across telescoping rails and locks into place easily using technology similar to my choice for best contractor table saw. This fence technology makes for precise repeated cuts and increases the reliability and usability of the saw.

The DW745 provides casual woodworkers with big power and a good rip capacity for a smaller weight, and I gave it a 4.7 out of 5 rating.

Buy the DEWALT DW745 here.

Best table saw under $400

The models chosen for the under $400 price range are made from more heavy-duty material than all of the options from the lower budget ranges. So, it makes sense that you’ll see a higher price tag. But now, how do you determine which model makes the most of your money and gives you the features you need? I’ve given you three models to choose from, with different pros and cons to each.

Our top pick for under $400 is the Bosch GTS1031 benchtop table saw. But you may notice this saw is lighter weight with smaller rip capacity and the same 15-amp motor power as the Genesis, for a higher price – so, why choose the Bosch GTS1031?

the best table saw under $400 - Bosch GTS1031 benchtop

Because of its ease of transport and ability to be placed almost anywhere. As a benchtop table saw, the GTS1031 has a smaller footprint than the jobsite table saws mentioned here and can be less cumbersome to move from one location to the next. The lack of a stand can be beneficial for those looking to have an easier time moving their saw between locations. You’ll have to ensure you have a tabletop to place the saw on, but you won’t have to worry about handling both a saw and a stand

On top of that, it is made completely from steel, giving it great sturdiness and durability. Even being made from steel, the Bosch GTS1031 weighs in at only 52 lbs. The Genesis is forged from aluminum and still manages to come in at a higher weight.

The Bosch GTS1031 has all three key safety features: blade guard, riving knife, and anti-kickback pawls, and includes an easy-to-use rip fence, miter gauge, push stick, a dust port, and wrenches. Compared to the two other contenders in the $400 budget category, the Bosch provides the most reliability and durability according to customers. I gave it a rating of 4.4 out of 5. Buy the Bosch GTS1031 here.

Related: Four basic types of table saws

Best table saw under $500

The Bosch 4100-09 jobsite table saw, with my rating of 4.6 out of 5, came out on top for the est table saw under $500. With its Gravity-Rise™ stand, in which you twist one lever and the steel frame folds up or down smoothly, the Bosch 4100-09 is easy to convert from storage or transport to use. The stand also includes wheels, making for easy transport without needing to fold the stand.

the best table saw under $500 - Bosch 4100-09 jobsitethe best table saw under $500 - Bosch 4100-09 jobsite

Weighing in at 105 lbs., it is heavier than any of the lower-budget options, and it is also lacking in rip capacity for such a large model, at 25 inches (around the same as a handful of less expensive options). It operates at 15 amps, giving it equal power output to most options reviewed.

The Bosch 4100-09 includes a “smart guard” system containing the key safety features: a blade guard, riving knife, and anti-kickback feature to heighten its safety. The fence system also proves easy to use and is crafted from machined aluminum. The model includes a dust port compatible with most vacuums.

Despite its smaller rip capacity relative to its weight, the Bosch 4100-09 is great choice for under $500 because of its wheel-equipped stand and sturdy build. Buy the Bosch 4100-09 here.

Best overall table saw under $600

For the casual hobbyist and those who need both portability and stability in their table saw, check out the DEWALT DWE7491RS jobsite table saw. Coming in first for the under $600 category, this model has a 10-inch blade and 32.5-inch rip capacity—a great rip capacity for a jobsite table saw.
best table saw under $600 - DEWALT DWE7491RS jobsite

The DEWALT DWE7491RS also has wheels, making transport of the 110 lbs. saw easier. On top of that, the entire mechanism folds up, making it much easier to store or to transport when not using the wheels. This model comes with a blade guard, miter gauge, push stick, riving knife, and anti-kickback pawls, giving it all the recommended safety features.

The fence system is particularly noteworthy, as it can be locked, unlocked, and adjusted with one hand. The table surface is crafted from aluminum, as is most of the DEWALT DWE7491RS. There are some smaller parts made from plastic, though, including the miter gauge.

Although this model has an open base, it includes a 2-inch dust collection port to connect to a vacuum and manage dust during a project and hassle during clean-up. Like many other models reviewed here, the DEWALT DWE7491RS operates on a 15-amp motor.

This model was an easy decision for the top option under $600, based on its small size, ease of portability, and storage (despite its heavier weight). We gave it a 4.8 out of 5 rating, putting it on top for the under $600 category.

Buy the DEWALT DWE7491RS here.

Best overall table saw under $1000

We saw the Makita 2705 come out on top for the under $600 category. Here, I’ve got an enhanced version of that model. It still operates on a 15-amp motor and has a rip capacity of 25 inches, and it has all three key safety features—riving knife, anti-kickback pawls, and a blade guard, plus an electric brake for use in case of an emergency. It includes the rip fence, wrenches, and push stick that I’ve seen with most models as well. So, what sets it apart?
the best table saw uneder $1000 dollars - Makita 2705X1

The Makita 2705X1 jobsite table saw, unlike its smaller counterpart, comes with a built-in stand equipped with wheels, similar to models I’ve reviewed above. These wheels allow for easier transport for this 115-lb. jobsite table saw (including the stand weight) and allow the user portability while keeping the power intact. The saw is made of die-cast aluminum like the 2705, but the stand is what adds significant weight to the unit.

If you don’t need as much power, or you’d like a Makita with a smaller footprint, the Makita 2705 is a better option for you. The smaller, less expensive option is also ideal for those with a lower budget who don’t plan on moving their table saw very often.

However, for those looking to complete more intensive projects with a sturdy table saw that can still be moved from one location to another, go for the enhanced Makita 2705X1. It’ll be worth the extra upfront cost. I picked the Makita 2705X1 over the Bosch 4000-09 for the best table saw under $1000 based on the lower cost and the relatively identical portability between the two.

I gave the Makita 2705X1 a 4.5 out of 5 rating, based on the combination of price, features, and safety. Buy the Makita 2705X1 here.

Related: miter saw vs crosscut sled or panel sled on a table saw

Best table saw by price – Comparison Table

Model Rating Price Power Weight Rip Capacity
Craftsman Evolv Model 28461 4.7 $$ 15 amps 50 lbs. 24 inches
Rockwell Shop Series RK7323 4.4 $ 5.5 amps 14 lbs. 6 inches
Rockwell Shop Series RK7240 4.2 $$ 13 amps 33 lbs. 12 inches
Genesis Table Saw GTS10SB 4 $$ 15 amps 56 lbs. 24 inches
DEWALT DW745 4.7 $$$ 15 amps 53 lbs. 20 inches
SKIL 3410-02 4.2 $$$ 15 amps 67 lbs. 24.25 inches
Bosch GTS1031 4.4 $$$$ 15 amps 52 lbs. 18 inches
Rockwell RK7241S 4.3 $$$$ 120 volts 88 lbs. 30 inches
DEWALT DWE7480 4.2 $$$$ 15 amps 48 lbs. 24 inches
Bosch 4100-09 4.6 $$$$$ 15 amps 105 lbs. 25 inches
DEWALT DWE7490X 4.5 $$$$$ 15 amps 87 lbs. 28 inches
DEWALT DWE7480XA 4.5 $$$$$ 15 amps 54 lbs. 24 inches
Makita 2705 4.7 $$$$$$ 15 amps 82 lbs. 25 inches
DEWALT DWE7491RS 4.8 $$$$$$ 15 amps 110 lbs. 32.5 inches
Makita 2705X1 4.5 $$$$$$$$ 15 amps 115 lbs. 25 inches
Bosch 4000-09 4.4 $$$$$$$$$$ 15 amps 109 lbs. 25 inches

 

What is the best table saw to buy in each price range?

This section includes specification of the best table saws overall separated by type, so you can compare the advantages and disadvantages of each model and narrow down your favorites. Using this information you should be able to determine what the best table saw for your needs and your budget is.

The following review covers portable table saws only, because cabinet and hybrid table saws will cost you more than $1000 unless you buy a used or refurbished model. If you need the serious stability of a cabinet or hybrid model, or you’re looking to make your table saw a permanent fixture in one location, you’re going to want to check out my table saw review that covers all three types of saw.

Table saw with blade

No matter what price range you’re working in, it is most important to determine what jobs you want to complete with your saw and how portable you need it to be. You might end up with a powerful, heavy-duty table saw, but if it’s too heavy to move and you need to work at multiple sites, it could turn into a regrettable purchase in the end.

Keep reading to see top-rated options for every budget, and let us help you figure out which table saw is the best for you to bring home.

How to choose the best jobsite/portable/contractor table saw for you

If you’re someone looking to use their table saw for home improvement projects, or a beginner, novice, or casual woodworker with limited space, a portable table saw would work best for you. The small surface size and blade diameter makes the portable table saw more suited for cutting plywood, pine, or other soft woods than for cutting full sheets of material. These models often have rip capacities smaller than 30 inches, and may or may not come with a stand.

Portable table saws are often grouped into two categories: benchtop and jobsite. The former is best for those with limited workspace or those looking to use the saw for personal home improvement jobs, while the latter is more beneficial for those in the construction industry who want to improve the accuracy of hand tools without sacrificing the portability. From my experience, jobsite table saws tend to be pricier, but you often get more powerful motors and an included stand.

What you plan on using your saw for will affect which portable saw you choose—for larger projects, you’ll likely prefer a jobsite table saw, and for smaller, less intensive jobs, a benchtop table saw. The two jobsite models I recommended—the Craftsman Evolv 15 amp 10 in. Model 28461 and the Rockwell RK7240—sit at the higher end of the under $200 budget category, while the benchtop Rockwell RK7323 comes in below $100.

Related: Crosscut sled for a portable table saw

Reviews of table saws under $200

This price range is great for those who are intermittent woodworkers or those looking to complete smaller projects. They won’t take up much space and they won’t damage your wallet too badly either. However, if you think you might want to take on larger, more intensive jobs, or work with hard materials that some portable table saws can’t handle, it might be worth rethinking your budget. You don’t want to spend a couple of hundred dollars to use a table saw for some time before realizing that you need something with more power and a bigger surface area.T

The two jobsite models featured here will be best for those without a surface to place their table saw on, and the benchtop is best suited for those looking to place their saw on an established surface, or looking to transport their saw without the hassle of folding or dismantling a stand.

Craftsman Evolv Model 28461 Jobsite table saw

Most (if not all) new table saws under $200 are going to be portable table saws, so you likely won’t be getting a saw that can tackle big home projects or professional undertakings. You could look around for used or refurbished cabinet or hybrid table saws for under $200, but that is an unlikely find.

That being said, you can still get bang for your buck with these smaller models. My top pick for this category is the Craftsman Evolv Model 28461 table saw.

Craftsman Evolv Model 28461 Jobsite table saw review

This table saw is on the more expensive end of table saws under $200, but you get your money’s worth in the quality and included accessories. The Craftsman Evolv 28461 comes with a stand, push stick, rip fence, miter gauge, and wrenches. It also has the three key safety features to look for in table saws: anti-kickback pawls, a riving knife, and a blade guard.

Although the Craftsman Evolv 28461 is lightweight, it is made from steel, giving it stability and durability. Keep in mind that despite the inclusion of a stand, at 50 lbs. the Craftsman Evolv 28461 is still a portable table saw.

It can be used for jobsite work, because of its 15-amp motor and ability to cut cleanly through hard woods, but is more ideal for personal home improvement projects, as are most portable table saws.  It has a 24-inch rip capacity, which is in the typical range for a jobsite table saw.

Unlike the portable table saws without a stand, the Craftsman Evolv 28461 can handle larger and longer pieces of stock with no issue. The rip fence and miter gauge are easy to adjust and offer precise and repeatable cuts.

For under $200, the Craftsman Evolv 28461 gives you high levels of safety, portability, and accuracy not often seen in table saws in this price range. I gave it a 4.7 out of 5 rating. Buy the Craftsman Evolv Model 28461 here.

Pros Cons
Sturdy material but lightweight Not ideal for extremely heavy-duty projects
Includes top three recommended safety features Lacks same stability as cabinet or hybrid
Stand included Pricier

 

Rockwell BladeRunner X2 RK7323 Benchtop table saw

On the lower price end of the under $200 category, the Rockwell BladeRunner X2 RK7323 is my top recommendation for a benchtop table saw and my second-best recommendation for an overall portable table saw.

Unlike the two benchtop table saw suggestions, this model utilizes T-shank jig saw blades rather than circular saw blades. The blades can be changed without tools, making it quick and hassle-free to move from cutting one material to another. The Rockwell RK7323 can cut wood, metal, ceramic tile, aluminum, or plastic, with a rip capacity of 6 inches. As such a small table saw with a small rip capacity and 5.5-amp motor power, this saw is suited for less intensive projects.

Rockwell BladeRunner X2 RK7323 Benchtop table saw review

Included with the Rockwell RK7323 are, similar to the other recommended options, a miter gauge, rip fence, general purpose blade for wood, scroll cutting blade for wood, tile blade for ceramic tile, a metal cutting blade, and an aluminum cutting blade. This model utilizes a blade guard and splitter pairing to ensure safety and lower the likelihood of kickbacks.

Weighing in at 14 lbs., the lightest portable table saw in my review, the Rockwell RK7323 comes with built-in tabletop handles, too, to make transport even easier. The stainless steel work surface allows for smooth use and easy control when sending materials through the blade.

With its light weight, portability, and low price, the Rockwell RK7323 is great for home use and for making quick trips to smaller jobs offsite, and it is able to be used on a variety of materials thanks to the blade assortment included. I gave it a 4.4 out of 5 rating based on the price versus value combination. Buy the Rockwell BladeRunner X2 RK7323 here.

Pros Cons
One of the lightest options out there Very small rip capacity and motor power
Able to be used with multiple materials No stand included
Built-in handles for easy transport Nearly same price as Evolv for less power

Related: table saw vs bench saw

Rockwell Shop Series RK7240 Jobsite table saw

Another option under $200, the Rockwell Shop Series RK7240 has a smaller rip capacity, at 12 inches, and a less powerful motor, at 13 amps, than my top-rated Craftsman Evolv. However, don’t go writing the Rockwell RK 7240 off yet.

This model weighs in at 33 lbs., a full 17 lbs. under the Craftsman Evolv. So, if you think you might have trouble transporting the 50-lb. table saw, or you’re planning on moving it often and don’t want to lug around the extra weight every time, the Rockwell RK7240 would be a better option for you. It has a cast-aluminum table top, which contributes to the lower weight.

Rockwell Shop Series RK7240 Jobsite table saw review

Like the Craftsman Evolv, this model comes with a stand, making it a good option to use at a jobsite rather than in a smaller home workshop. It also includes a miter gauge, rip fence, push stick, and blade guard, like the Craftsman model.

Consumers note that they like the power of the motor coupled with the ability to handle large stock, as well as the stability provided by the stand. The Rockwell RK7240 also comes with an integrated dust collection system, allowing for easy vacuum attachment to control dust in the workspace.

While providing a few less amps of motor power and a smaller rip capacity by half compared to the top-rated Craftsman Evolv, the Rockwell RK7240 is still a great option for those looking for a jobsite table saw that is easy to move and safe to use. I gave it a 4.2 out of 5 rating. Buy the Rockwell Shop Series RK7240 here.

Pros Cons
Extremely lightweight (under 40lbs) Smaller rip capacity and motor power
Includes integrated dust collection system Lacks same stability as cabinet or hybrid
Stand included Nearly same price as Evolv for less power

 

Genesis GTS10SB Jobsite table saw

Though not reviewed as often as the Craftsman or Rockwell models above, the Genesis GTS10SB  is still a solid option for the under $200 price range thanks to its sturdy build and ease of use. It is, however, the most expensive and heaviest option reviewed in this price range, so keep that in mind when making your choice.

With a die-cast aluminum table, the Genesis offers a sturdy but lightweight table top that doesn’t add much to the overall unit weight of 56 lbs. This makes it the heaviest of the under $200 options, but it still remains light enough to transport from one location to another. It has a 24-inch rip capacity, putting it on par with the Craftsman Evolv model.

Genesis GTS10SB Jobsite table saw review

It includes a miter gauge, rip fence, push-stick, metal stand, and wrenches, along with a blade guard and anti-kickback pawls. However, it does not include a riving knife like many of the other models reviewed.

The Genesis has a built-in dust port for easy connection to a vacuum, and its rip fence is self-aligning, making it easy to adjust and lock into place. The stand does not fold for transport, which could make it bulkier to move but also provides more stability than models with folding stands.

The  Genesis isn’t made for cutting large, heavy materials, but it will serve the purpose of general contractors and woodworkers. I gave it 4 out of 5 review, due to the combination of its heavy weight, higher price, and included features. Buy the Genesis GTS10SB here.

Pros Cons
Sturdy stand made of lightweight aluminum Heaviest option of the under $200 table saws
Includes dust port Does not include riving knife
Self-aligning rip fence for easy adjustments

Reviews of table saws under $300

close up of an inexpensive table sawFor less than $300, you’re likely to get a lightweight, portable table saw that can still cut through many materials. They will have smaller rip capacities than pricier versions (in most cases) but these are great table saws for those working on recreational woodworking projects or those who are working on smaller contractor jobs in multiple locations, requiring the regular transport of your tool.

Always make sure that your budget matches your needs as closely as possible; like I mentioned for the under $200 category, you don’t want to purchase a smaller, less pricy table saw only to find out later that you need more power or surface area.

Related: table saw kickback prevention

DEWALT DW745 Portable table saw

Looking for a small footprint, big power, and a reasonable price? You’re looking for the DEWALT DW745 portable table saw—perfect for those who enjoy woodworking as a hobby or for small home DIY projects. At 53 pounds, this benchtop table saw is easy to transport from one location to the next, even without a stand or wheels. It typically comes in at the top of this price range, but its portability and power are worth the higher cost.

As a benchtop model, it comes as no surprise that the DW745 has no stand, but it is adaptable to certain aftermarket stands. However, the model does come with a miter gauge, push stick, and blade guard to increase the safety and usability of the saw.

DEWALT DW745 Portable table saw review

Similar to other benchtop and jobsite table saws, the DW745 has a 15-amp motor and boasts a rip capacity of 20 inches—smaller than that of the Craftsman Evolv (our under $200 category winner), but fairly large for its light weight.

The fence moves smoothly across telescoping rails and locks into place easily using technology similar to my choice for best contractor table saw. This fence technology makes for precise repeated cuts and increases the reliability and usability of the saw.

The DW745 provides casual woodworkers with big power and a good rip capacity for a smaller weight, and I gave it a 4.7 out of 5 rating. Buy the DEWALT DW745 here.

Pros Cons
Large rip capacity for a portable table saw No accompanying stand
Includes top three recommended safety features One of the heavier benchtop models
Most popular and reviewed model for any price

Related: what is a spindle lock / arbor lock on a table saw

SKIL 3410-02 Jobsite table saw

When working within a lower budget, you’ve probably noticed from my top picks that portable table saws are the way to go. The SKIL 3410-02 jobsite table saw comes with a folding stand and is a great choice for those looking to dabble in woodworking or complete projects around the house.

It won’t do for those who are working on larger projects or using their table saw for professional work; for that, you’ll have to drop a bit more money. Weighing in at 67 pounds, it stays true to its portable nature, but the stand does not include wheels to make transport even easier.

SKIL 3410-02 Jobsite table saw review

The SKIL 3410-02 has a 15-amp motor like the under-$200 Craftsman and the DEWALT DW745 above, giving it the typical power of a portable model. It also includes a self-aligning fence, ensuring precision and ease for the user, and has an “EZ measuring” system, eliminating the need for additional measuring tools.

It has a slightly larger rip capacity, at 24.25 inches, than the Craftsman Evolv, but it isn’t enough of a difference to make it a definitively better choice based on rip. The benchtop includes a riving knife and blade guard, but no anti-kickback pawls. The model also does not include a dust port.

Despite being best situated in one place for frequent use because of the lack of wheels, I think the SKIL 3410-02 is worth it for those looking to spend less than $300 but dip their toe into home woodworking with a powerful and durable machine. I gave it a 4.2 out of 5 rating. Buy the SKIL 3410-02 here.

Pros Cons
Light enough even with stand to be easily moved No wheels to improve ease of transport
Good stability for a reasonable price No dust port
Folds up for more convenient storage and transport

Reviews of table saws under $400

The models chosen for the under $400 price range are often made from more heavy-duty material than all of the options from the lower budget ranges. So, it makes sense that you’ll see a higher price tag. But now, how do you determine which model makes the most of your money and gives you the features you need? I’ve given you three models to choose from, with different pros and cons to each.

Bosch GTS1031 Benchtop table saw

Our top pick for under $400 is the Bosch GTS1031 benchtop table saw. But you may notice this saw is lighter weight with smaller rip capacity and the same 15-amp motor power as the Genesis, for a higher price – so, why choose the Bosch GTS1031?

Because of its ease of transport and ability to be placed almost anywhere. As a benchtop table saw, the GTS1031 has a smaller footprint than the jobsite table saws mentioned here and can be less cumbersome to move from one location to the next. The lack of a stand can be beneficial for those looking to have an easier time moving their saw between locations. You’ll have to ensure you have a tabletop to place the saw on, but you won’t have to worry about handling both a saw and a stand.

Bosch GTS1031 Benchtop table saw review

On top of that, it is made completely from steel, giving it great sturdiness and durability. Even being made from steel, the Bosch GTS1031 weighs in at only 52 lbs. The Genesis is forged from aluminum and still manages to come in at a higher weight.

The Bosch GTS1031 has all three key safety features: blade guard, riving knife, and anti-kickback pawls, and includes an easy-to-use rip fence, miter gauge, push stick, a dust port, and wrenches. Compared to the two other contenders in the $400 budget category, the Bosch provides the most reliability and durability according to customers. I gave it a rating of 4.4 out of 5. Buy the Bosch GTS1031 here.

Pros Cons
Steel build, but remains light weight with big power No wheels or stand
Smaller footprint to transport and place
Includes three key safety features

 

Rockwell RK7241S Jobsite table saw

Another top pick for the under $400 price range is the Rockwell RK7241S jobsite table saw. At the same price as the DEWALT DWE7480 (reviewed next) but with a stand and dust collection bag included, it came out just ahead of the DEWALT model.

Though a heavier model, at 88 lbs., the Rockwell RK7241S comes with integratenooped wheels and a foldable stand, making for easy transport from one location to the next while not having to sacrifice power. However, the foldable stand takes some stability away from the saw, and so helped place this model behind the Bosch GTS1031.

Rockwell RK7241S Jobsite table saw review

Unique to this model is a LaserGuide technology that improves accuracy and consistency of cuts by providing a true cutline indicator. This indicator displays exactly where the blade will cut the material, without the user having to refer to the blade itself. The Rockwell RK7241S also comes with a rip fence, miter gauge, push stick, riving knife, dust collection bag, and two blade wrenches.

This model has a 120V motor and a 30-inch rip capacity, making it easy to handle larger projects with this model. However, with the bigger power comes more space taken up, which is not convenient for all users. This is not the table saw for you if you’re looking for a small footprint.

Even with having to sacrifice some stability to gain easier portability, the Rockwell RK7241S jobsite table saw is a solid choice for a table saw under $400, particularly because of the included dust bag and laser technology. I give a 4.3 out of 5 for the Rockwell RK7241S. Buy the Rockwell RK7241S here.

Pros Cons
Dust collection bag included Stand lessens stability
Unique LaserGuide technology Bigger footprint that other models under $400
120V power and large rip capacity

DEWALT DWE7480 Benchtop table saw

A close second behind the Bosch GTS1031 benchtop table saw, the DEWALT DWE7480 benchtop model is also good for those working with minimal space and who need to move their saw from one location to the next. However, it comes it at a higher price tag than the Bosch above for a less sturdy material makeup, and so comes in a close second.

The DEWALT DWE7480 operates on a 15-amp motor and possesses a 24-inch rip capacity, as compared to the 18-inch capacity of the Bosch GTS1031. This means it can handle those larger materials just a bit better than its counterpart in the under $400 category. It weighs in at 48 lbs., with an aluminum tabletop painted with a non-friction surface seal, and has a dust port to allow for connection to a vacuum to minimize clean-up hassles.

DEWALT DWE7480 Benchtop table saw review

An interesting feature of this model is the adjustability of the rear feet, allowing the user to adjust the saw to level it on uneven surfaces. It also comes with a miter gauge, rip fences, a push stick, a blade guard, anti-kickback features, and a riving knife.

Despite being pricier than my top pick under $400, the DEWALT DWE7480 remains a good choice in this price range for those looking to cut larger materials and work on projects in multiple locations. I gave it a 4.2 out of 5 rating. Buy the DEWALT DWE7480 here.

Pros Cons
Adjustable rear feet for uneven surfaces No wheels or stand
Smaller footprint to transport and place Higher price for a benchtop model
Under 50 lbs.

 

Reviews of table saws under $500

Moving right on up through the price ranges, my picks for table saws under $500 are.

These are best for those looking to take on bigger contractor jobs or home improvement jobs that less durable and stable table saws may not be able to handle. All three options have stands in this category, though you can likely find benchtop table saws in this range as well. However, these three are the best quality and have the highest ratings and best customer reviews. If you truly want a benchtop table saw, either for its smaller footprint or because you have a surface you’d like to house it on, refer to some of my other reviews—there are benchtop versions both more and less expensive than this category.

Bosch 4100-09 Jobsite table saw

The Bosch 4100-09, with my rating of 4.6 out of 5, came out on top for best table saw under $500. With its Gravity-Rise™ stand, in which you twist one lever and the steel frame folds up or down smoothly, the Bosch 4100-09 jobsite table saw is easy to convert from storage or transport to use. The stand also includes wheels, making for easy transport without needing to fold the stand.

Weighing in at 105 lbs., it is heavier than any of the lower-budget options, and it is also lacking in rip capacity for such a large model, at 25 inches (around the same as a handful of less expensive options). It operates at 15 amps, giving it equal power output to most options reviewed.

Bosch 4100-09 Jobsite table saw review

The Bosch 4100-09 includes a “smart guard” system containing the key safety features: a blade guard, riving knife, and anti-kickback feature to heighten its safety. The fence system also proves easy to use and is crafted from machined aluminum. The model includes a dust port compatible with most vacuums.

Despite its smaller rip capacity relative to its weight, the Bosch 4100-09 is great choice for under $500 because of its wheel-equipped stand and sturdy build. Buy the Bosch 4100-09 here.

Pros Cons
Stand includes wheels for easy transport Small rip capacity for its size
Sturdy build for a transportable table saw One of the heavier transportable models
Smart guard system enhances safety

 

DEWALT DWE7490X Jobsite table saw

By now you’ve come to realize that DEWALT builds sturdy, reliable table saws. So it’s no surprise that another one made my list, in the under $500 category. Though not nearly as easy to transport as the Bosch 4100-09 above, it has a larger rip capacity (at 28 inches) and weighs almost 20 lbs. less (at 87 lbs).

It houses a 15-amp motor and can handle bigger projects, like ripping wood for decks or ripping sheet material, like almost all models I’ve listed. It includes two dust ports to allow for easy dust collection, though you have to connect your own vacuum and the dual design needs more work, according to customer comments.

DEWALT DWE7490X Jobsite table saw review

Like the other DEWALT table saws here, this model comes with the three key safety features: a riving knife, a blade guard, and anti-kickback pawls, keeping it true to the safety I’ve come to expect from DEWALT. It also includes a push stick, rip fence, miter gauge, and wrenches. The scissor stand design offers more stability than some of the less expensive jobsite models, but still less than the Bosch model above.

The DEWALT DWE7490X would be best for those buyers looking for a jobsite table saw rather than a benchtop, but who aren’t planning on moving it too often. Yes, it can be transported, but the Bosch 4100-09 is a better option for seamless transport that won’t put a strain on the one doing the moving. I gave it a 4.5 out of 5 rating. Buy the DEWALT DWE7490X.

Pros Cons
Larger rip capacity than other models listed No wheels for easier transport
Scissor stand offers good stability  Dual dust port could use redesign
Weighs significantly less than competitors in this price range

 

DEWALT DWE7480XA

You might be getting tired of seeing all the DEWALT options, but there’s a reason they keep making it on the list: reliability, power, and stability. DEWALT models give their users what they need and want in a table saw. The DEWALT DWE7480XA came in even with the DWE7490X model reviewed above, based on their similar features.

You may have also noticed that this seems to be another version of the DEWALT DWE7480 I mentioned in the under $400 category. You would be correct, but this pricier version is made from steel, and comes with the stand attached, making it more suitable for those working with larger materials and projects.

DEWALT DWE7480XA review

This model comes in at a lower price than the DWE7490X, but also sacrifices certain features to do so. It loses a few inches in rip capacity, at 24 inches, but keeps the 15-amp motor that the DEWALT DWE7490X operates on, too. It is heavier than the DWE7480, at almost 54 lbs., but this makes sense due to the stand and material (steel compared to aluminum).

Safety features remain the same, with the riving knife, anti-kickback pawls, and blade guard, and the DEWALT DWE7480XA includes a miter gauge, rip fence, push stick, and wrenches, too. It includes a dust port on the model as well for easy dust management.

You can purchase it with or without a stand, obviously at a lower price for the version without one. The DEWALT DWE7480XA is a good option for someone who likes the DWE7480 design but was looking for a jobsite table saw rather than a benchtop, or for someone who likes the DWE7490X design but wants a lower price. I gave it a 4.5 out of 5 rating. Buy the DEWALT DWE7480XA here.

Pros Cons
Good jobsite alternative to the DWE7480 No wheels for easier transport
Scissor stand offers good stability Smaller rip capacity than pricier version
Lightweight particularly for a jobsite model

 

Reviews of table saws under $600

So, you’re pretty serious about your woodworking and ready to make an investment in your equipment. Welcome to the under $600 price range

These are best for those looking to take on bigger contractor jobs or home improvement jobs that less durable and stable table saws may not be able to handle. The two options with stands and wheels are best for those looking to move their table saw often and easily, but the 82-lb. benchtop table saw’s usefulness should not be discounted because it may be a little harder to move. It maybe just be better suited for someone who has a surface they’d like to use their table saw for most jobs.

DEWALT DWE7491RS Jobsite table saw

For the casual hobbyist and those who need both portability and stability in their table saw, check out the DEWALT DWE7491RS jobsite table saw. Coming in close second for the under $600 category, this model has a 10-inch blade and 32.5-inch rip capacity—a great rip capacity for a jobsite table saw.

The DEWALT DWE7491RS also has wheels, making transport of the 110 lbs. saw easier. On top of that, the entire mechanism folds up, making it much easier to store or to transport when not using the wheels. This model comes with a blade guard, miter gauge, push stick, riving knife, and anti-kickback pawls, giving it all the recommended safety features.

DEWALT DWE7491RS Jobsite table saw review

The fence system is particularly noteworthy, as it can be locked, unlocked, and adjusted with one hand. The table surface is crafted from aluminum, as is most of the DEWALT DWE7491RS. There are some smaller parts made from plastic, though, including the miter gauge.

Although this model has an open base, it includes a 2-inch dust collection port to connect to a vacuum and manage dust during a project and hassle during clean-up. Like many other models reviewed here, the DEWALT DWE7491RS operates on a 15-amp motor.

This model was an easy decision for the top option under $600, based on its small size, ease of portability and storage (despite its heavier weight). I gave it a 4.8 out of 5 rating, putting it on top for the under $600 category. Buy the DEWALT DWE7491RS here.

Pros Cons
Stand includes wheels for easy transport Made from aluminum + plastic, not steel
Large rip capacity
Easy-to-use fence system

 

Makita 2705 Benchtop table saw

Adding another small yet sturdy recommendation to our list, the Makita 2705 gives its owner the trifecta of power, stability, and portability, for under $600. As a result of its smaller rip capacity of 25 inches, the Makita 2705 came out just behind the DEWALT DWE7491RS reviewed above.

This benchtop model weighs in at 82 lbs. and is made of die-cast aluminum, so even though it doesn’t come with a stand, it still is possible to transport it between locations (if you’d like this model but with easier transport, check out the review for the Makita 2705X1 further into this review). This model operates on a 15-amp motor and is a good option for both professionals and hobbyists based on its power, versatility, and accuracy.

Makita 2705 Benchtop table saw review

The Makita 2705 comes with telescoping fence rails, a miter gauge, a riving knife, anti-kickback pawls, and a blade guard. It also includes an electric brake in case of an emergency, giving it a leg up on other models in terms of safety. There is a dust collection port, but customer reviews have said that dust collection is subpar without the addition of a vacuum.
With solid customer reviews and our own 4.7 out of 5 rating, the Makita 2705 is a great option for an affordable table saw.

Buy the Makita 2705 here.

Pros Cons
Includes key safety features and then some Poor dust collection
Sturdy but lightweight No stand included
Takes up minimal amount of space

 best table saw on a budget reviews

Reviews of table saws under $1000

For whatever reason, not many options for table saws exist between $600–1000. This is likely due to the fact that the other categories of table saws not mentioned here, cabinet and hybrid table saws, cannot be found new for less than $1000.

Most portable models will come in at lower prices based on their lightweight materials and smaller build, but the two options reviewed for this category are still good, if pricier, options for those who want power machines that can still be transported to different job sites.

If you’re not looking for portability and you want more power than what these options offer, you’re going to need to increase your budget and go for a cabinet or hybrid table saw. Check out my best cabinet table saw review or my best hybrid table saw review.

Makita 2705X1 Jobsite table saw

We saw the Makita 2705 come out on top for the under $600 category. Here, we’ve got an enhanced version of that model. It still operates on a 15-amp motor and has a rip capacity of 25 inches, and it has all three key safety features—riving knife, anti-kickback pawls, and a blade guard, plus an electric brake for use in case of an emergency. It includes the rip fence, wrenches, and push stick that I’ve seen with most models as well. So, what sets it apart?

The Makita 2705X1 jobsite table saw, unlike its smaller counterpart, comes with a built-in stand equipped with wheels, similar to models I’ve reviewed above. These wheels allow for easier transport for this 115-lb. jobsite table saw (including the stand weight) and allow the user portability while keeping the power intact. The saw is made of die-cast aluminum like the 2705, but the stand is what adds significant weight to the unit.

Makita 2705X1 Jobsite table saw review

If you don’t need as much power, or you’d like a Makita with a smaller footprint, the Makita 2705 is a better option for you. The smaller, less expensive option is also ideal for those with a lower budget who don’t plan on moving their table saw very often.

However, for those looking to complete more intensive projects with a sturdy table saw that can still be moved from one location to another, go for the enhanced Makita 2705X1. It’ll be worth the extra upfront cost. I gave the Makita 2705X1 a 4.5 out of 5 rating, based on the combination of price, features, and safety. Buy the Makita 2705X1 here.

 

Pros Cons
Stand includes wheels for easy transport Made from aluminum + plastic, not steel
More portable version of Makita 2705
Easy-to-use fence system

Bosch 4000-09 table saw

Our second recommendation under $1000 is the Bosch 4000-09 jobsite table saw. It’s significantly more expensive than the Makita 2705X1 above, but it is made of a combination of steel and aluminum parts and offers more stability.

It possesses the same Gravity-Rise™ stand as the other two Bosch models I reviewed, in which you twist one lever and the steel frame folds up or down smoothly, the Bosch 4000-09 is easy to convert from storage or transport to use, despite its 109-lb. weight. The stand also includes wheels, making for easy transport without needing to fold the stand.

Bosch 4000-09 table saw review

The Bosch 4000-09 jobsite table saw has a 25-inch rip capacity, like the Makita model above, and only a slightly lighter weight. As both options have wheels and stands to make transport easy, you can get similar results for a lower price with the Makita, though this is a good option for lovers of the Bosch brand.

The saw has a miter gauge and rip fence, as well as the three key safety features: riving knife, anti-kickback pawls, and blade guard. It comes with a push stick and a built-in dust port, enhancing both safety and clean up.

When determined which Bosch model is best for you, you should take into account (along with your budget) what you want from your Bosch. If you want a smaller footprint or already have a surface to place your table saw on, go with the less expensive Bosch BTS1031. If you still want the jobsite build, you have to make the decision between this larger version and the smaller Bosch 4100-09. What it comes down to with these models is price point and preference. With Bosch, you’re getting a good product regardless of the size.

I gave the Bosch 4000-09 a 4.4 out of 5 rating, based on the high price relative to the features. Buy the Bosch 4000-09 here.

 

Pros Cons
Three key safety features included High price for similar features in lower price models
Gravity-RiseTM stand makes transport a breeze Easy to transport, but large to s tore
Reliable stability and durability

Most popular table saw

The most popular table saw among all of these great options is the DEWALT DW745. I have given it 4.7 out of 5 stars. It is one of the most popular table saws available on the market now, due to the needs of customers and the low price that comes with benchtop table saws. Though it is not the best in terms of features nor power, it is affordable and created by a well-known and respected manufacturer. Though this saw is popular it is not my recommendation as the best overall table saw as it is under powered for larger jobs and lacks the surface size and material necessary for those jobs. If you like the DEWALT brand and want a larger, more capable model, I recommend the DEWALT DWE7491RS as it packs more power and offers a large rip capacity than its smaller counterpart.

Best cheap or inexpensive table saw

The best cheap table saw could be considered the Craftsman Evolv Model 28461 BUT I personally would spend the extra to get a next level model that is considerably better. So if you are looking for a good cheap table saw, I would consider the DEWALT DW745 as the best inexpensive table saw and a much better choice. It is not the cheapest but it is still low cost and a very affordable table saw. It also happens to be the most popular table saw.

Best table saw on the market in your price range or budget

table saw in different price ranges

To finish up, I did my best to cover all relevant aspects of purchasing a table saw in a given price range. My goal was to help you make the best decision for your table saw purchased, based on all the available facts and reviews, and hope I have succeeded. If you find yourself needing to review table saw basics and how to differentiate between the three main types (portable, cabinet, and hybrid), check out my table saw buyer’s guide.

Going forward, I hope you come back to use this article for table saw questions or suggestions when you’re working in a certain budget, or to my other reviews to help you with your next big purchase. Whatever type you choose, and whichever model you choose, you can’t go wrong. Each item included in this review was chosen for a particular reason and is a great quality product from table saw manufacturing leaders. Just keep in mind your needs and budget, and you’ll reach the right conclusion for your purchase.

Even with all the information I’ve provided here for you, making a decision can still be difficult. So, to help you one more time before you go, I suggest taking another look at my reviews for best overall table saw (the Makita 2705) and the most popular table saw (the DEWALT DW745) before you make your purchase.

Best Miter Saw

Another tool that every serious woodworker needs is a miter saw! Check out my review of miter saws here:

Best Hybrid and Cabinet Table Saws

If you have a larger budget and want a serious table saw you can check out my review of hybrid and cabinet table saws here:

Share this Post

Comments 2

  1. Hi, Wow, what a really comprehensive review!

    My brother has the Makita 2705X1 and it is a great saw but pricey. He is very happy with it. I guess that it is worth it for him since he does a lot of work with it.

    I don’t want to spend so much. My budget is $400 as I will only be using it on weekends. I will get the Bosch GTS1031 that you recommend.

    Thanks for your help!

  2. This is a very detailed review, thanks so much. I did a lot of research looking for a quality table saw under $300, but evidently there’s not many out there. In the end I got the DEWALT DW745 – exactly what you have on here. Things are going okay so far, and I hope it stays that way. Thanks for the great writeup!

Leave a Reply

Your email address will not be published. Required fields are marked *